Telescopic Hydraulic Ram 5 Stage Single Acting for Dump Truck /
Telescopic cylinders have two or more piston rods in a coaxial
arrangement to achieve greater extended length compared to the
retracted length. An external force is required to return the
cylinder to the retracted position. A typical application for a
single-acting cylinder is a lift truck, where the load of the fork
pushes the cylinder back.
a. Every DALLAST single acting telescopic cylinder is individually
tested before leaving our plant to assure proper performance and
leak-free operation. All cylinder products carry an 12 months
b. Snap on glass filled bearings that absorb contaminants without
damaging cylinder walls.
c. Nylon tipped set screws that conform to packing nut threads to
decrease the probability of packing
nuts backing off.
d. Single-acting cylinders transfer force and motion in one
e. Acts on the piston to push the piston rod out.
f. When manufacturing multistage cylinders, the number of stages
are able to produce, which is limited only by the physical confines
of the cylinder requirement.
g. Cylinder designs include welded and screwed type, welded and
bolted, fully bolted or tie rod or can take the form of your
h. All our piston rods are hard protection coated, such as hard
chrome plate, or if required, can be coated with an alternative
treatment more suitable to the application.
About piston rod:
High strength damage resistant piston rod provides 100,000 PSI
minimum yield material in 1" through 4 1/2" diameters. Larger
diameters vary between 50,000 and 75,000 PSI minimum yield
material. All rods are case hardened to 50-55 RC and hard chrome
plated to provide maximum wear life. Stainless steel is also
available. The hard chrome plated of the piston rod according to
Installation center distance
We offer 12 months warranty.
From the date of delivery within 12 months, our company is
responsible for the replacement, repair or return. The user is a
hydraulic cylinder propulsion, to improve the inherent quality of
the fuel tank is the purpose of our factory production and the
pursuit of goals.
The most common problems when selecting a hydraulic cylinder are as
A. Retract dimension (Center of pin to center of pin)
B. Stroke length (Inches)
C. Mounting types
D. Port Size and Type (SAE or NPT)
E. Pressure rating (PSI)
F. Bore Diameter (Inches)
G. Application details
1. Various operation instructions such as: products inspect and
control ,Receiving inspection control ,sampling inspection
operation instruction, process quality inspection operation
2. Pre-sale service and free consultation service.
3. Quality control service includes pre-acceptance, departure
inspection, arrival inspection, PDI delivery inspection.
4. Guarantee period is subjected to warranty instruction (1 year/
2000 hours whichever comes first).
5. Free after-sale service during the warranty refers to problems
caused by quality issues; any non quality problem occurred, we will
charge the maintenance fee according to relevant standard.
6. Service Center all over the world for after sales problems.